593d www.vishay.com vishay sprague revision: 09-apr-13 1 document number: 40005 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 solid tantalum surface mount chip capacitors t antamount ? , molded case, low esr effective september 2005, new capacitor ratings will not be added to the 593d series. all new ratings are available in the tr3 series. the tr3 series offers state-of-the-art low esr for switch mode power suppl ies and dc/dc converters. performance characteristics www.vishay.com/doc?40088 operating temperature: - 55 c to + 125 c ? (above + 85 c voltage derating is required) capacitance range: 0.47 f to 680 f capacitance tolerance: 5 %, 10 %, 20 % 100 % surge current tested (c, d and e case sizes) voltage rating: 4 v dc to 50 v dc features ?low esr ? molded case available in five case codes ? terminations: 100 % matte tin, standard, tin/lead available ? high ripple current carrying capability ? compatible with high volume automatic pick and place equipment ? moisture sensitivity level 1 ? compliant terminations ? meets iec specification qc300801/us0001 and eia535baac mechanical an d performance requirements ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note ? * this datasheet provides information about parts that are ? rohs-compliant and/or parts th at are non-rohs-compliant. for ? example, parts with lead (pb) te rminations are not rohs-compliant. ? please see the information/tables in this datasheet for details. applications ? industrial ? telecom infrastructure ? general purpose notes ? we reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. ? voltage substitutions will be marked with the higher voltage rating. ? effective july 15, 2008, part numbe rs with solderable term ination codes 2t and 2w may have ei ther matte or tin/ lead termination s. ? codes 2te3 and 2we3 specify only matte tin terminations. codes 8t and 8w specify only tin/lead terminations. ? low esr solid tantalum chip capacitors allow delta esr of 1.25 time s the datasheet limi ts after mounting. ? dry pack is available per request, contact regional marketing. available ordering information 593d 107 x9 010 d 2we3 type capacitance capacitance tolerance dc voltage rating at + 85 c case code termination and packaging this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow x0 = 20 % x9 = 10 % x5 = 5 % (special order) this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an r (6r3 = 6.3 v) see ratings and case codes table 2te3: matte tin, 7" (178 mm) reel 2we3: matte tin, 13" (330 mm) reel 8t: tin/lead, 7" (178 mm) reel 8w: tin/lead, 13" (330 mm) reel
593d www.vishay.com vishay sprague revision: 09-apr-13 2 document number: 40005 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches [millimeters] case code eia size l w h p t w t h (min.) a 3216-18 0.126 0.008 [3.2 0.20] 0.063 0.008 [1.6 0.20] 0.063 0.008 [1.6 0.20] 0.031 0.012 [0.80 0.30] 0.047 0.004 [1.2 0.10] 0.028 [0.70] b 3528-21 0.138 0.008 [3.5 0.20] 0.110 0.008 [2.8 0.20] 0.075 0.008 [1.9 0.20] 0.031 0.012 [0.80 0.30] 0.087 0.004 [2.2 0.10] 0.028 [0.70] c 6032-28 0.236 0.012 [6.0 0.30] 0.126 0.012 [3.2 0.30] 0.098 0.012 [2.5 0.30] 0.051 0.012 [1.3 0.30] 0.087 0.004 [2.2 0.10] 0.039 [1.0] d 7343-31 0.287 0.012 [7.3 0.30] 0.169 0.012 [4.3 0.30] 0.110 0.012 [2.8 0.30] 0.051 0.012 [1.3 0.30] 0.094 0.004 [2.4 0.10] 0.039 [1.0] e 7343-43 0.287 0.012 [7.3 0.30] 0.169 0.012 [4.3 0.30] 0.157 0.012 [4.0 0.30] 0.051 0.012 [1.3 0.30] 0.094 0.004 [2.4 0.10] 0.039 [1.0] ratings and case codes f 4 v 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 0.47 a 0.68 a 1.0 a a a a/b b/c 1.5 ab/cb/c 2.2 aa/bb/cc/d 3.3 a a b c c/d 4.7 a a/b a/b b/c c d/e 6.8 a a b c c/d d/e 10 a a a/b/c b/c c c/d d/e 15 a a a/b b/c b/c c/d d/e 22 a a/b a/b/c b/c c/d d d/e 33 a/b a/b b/c b/c/d c/d d/e 47 a/b b/c b/c/d c/d d/e e 68 b/c b/c c/d d d/e 100 b/c b/c/d c/d d/e e 150 b/c/d c/d/e d/e e 220 c/d d/e d/e 330 d d/e e 470 d/e e 680 e l t h (min.) h w t w p
593d www.vishay.com vishay sprague revision: 09-apr-13 3 document number: 40005 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 marking a case voltage code volts code 4.0 g 6.3 j 10 a 16 c 20 d 25 e 35 v 50 t marking capacitor marking includes an anode (+) polarity band, capacita nce in microfarads and the voltage rating. a case capacitors u se a letter code for the voltage and eia capacitance code. the vishay sprague ? trademark is included if space permits. capacitors rated at 6.3 v are marked 6 v. a manufacturing date code is marked on all capacitors. capacitors might bear a slightly different marking than the one shown above. for example, rating 22 f 10 v could be marked eit her as 22-10l or 22r10. call the factory for further explanation. standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) 4 v dc at + 85 c; 2.7 v dc at + 125 c 15 a 593d156(1)004a(2) 0.6 6 1.500 0.22 22 a 593d226(1)004a(2) 0.9 6 1.500 0.22 33 a 593d336(1)004a(2) 1.3 6 1.500 0.22 33 b 593d336(1)004b(2) 1.3 6 0.500 0.41 47 a 593d476(1)004a(2) 1.9 14 0.800 0.31 47 b 593d476(1)004b(2) 1.9 6 0.500 0.41 68 b 593d686(1)004b(2) 2.7 6 0.500 0.41 68 c 593d686(1)004c(2) 2.7 6 0.275 0.63 100 b 593d107(1)004b(2) 4.0 8 0.450 0.43 100 c 593d107(1)004c(2) 4.0 6 0.225 0.66 150 b 593d157(1)004b(2) 6.0 14 0.500 0.41 150 c 593d157(1)004c(2) 6.0 12 0.250 0.66 150 d 593d157(1)004d(2) 6.0 8 0.150 1.00 220 c 593d227(1)004c(2) 8.8 8 0.200 0.74 220 d 593d227(1)004d(2) 8.8 8 0.150 1.00 330 d 593d337(1)004d(2) 13.2 8 0.150 1.00 470 d 593d477(1)004d(2) 18.8 10 0.125 1.10 470 e 593d477(1)004e(2) 18.8 10 0.100 1.28 680 e 593d687(1)004e(2) 27.2 12 0.100 1.28 6.3 v dc at + 85 c; 4 v dc at 125 c 10 a 593d106(1)6r3a(2) 0.6 6 2.000 0.19 15 a 593d156(1)6r3a(2) 0.9 6 2.000 0.19 22 a 593d226(1)6r3a(2) 1.3 6 2.000 0.19 22 b 593d226(1)6r3b(2) 1.3 6 0.600 0.38 33 a 593d336(1)6r3a(2) 2.0 14 0.800 0.31 note ? part number definitions: (1) tolerance: x0, x9, x5 (2) terminations and packaging: 2te3, 2we3, 8t, 8w capacitance code, pf indicates lead (pb)-free polarity band voltage code v 104l a case data code vishay sprague logo indicates lead (pb)-free voltage capacitance f polarity band 22 10l xx 2 b, c, d, e cases
593d www.vishay.com vishay sprague revision: 09-apr-13 4 document number: 40005 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6.3 v dc at + 85 c; 4 v dc at 125 c 33 b 593d336(1)6r3b(2) 2.0 6 0.600 0.38 47 b 593d476(1)6r3b(2) 2.8 6 0.550 0.39 47 c 593d476(1)6r3c(2) 2.8 6 0.300 0.61 68 b 593d686(1)6r3b(2) 4.1 6 0.550 0.39 68 c 593d686(1)6r3c(2) 4.1 6 0.275 0.63 100 b 593d107(1)6r3b(2) 6.0 15 0.500 0.41 100 c 593d107(1)6r3c(2) 6.0 6 0.250 0.66 100 d 593d107(1)6r3d(2) 6.0 6 0.140 1.04 150 c 593d157(1)6r3c(2) 9.0 8 0.200 0.74 150 d 593d157(1)6r3d(2) 9.0 8 0.125 1.10 150 e 593d157(1)6r3e(2) 9.0 8 0.100 1.28 220 d 593d227(1)6r3d(2) 13.2 8 0.100 1.22 220 e 593d227(1)6r3e(2) 13.2 8 0.100 1.28 330 d 593d337(1)6r3d(2) 19.8 8 0.125 1.10 330 e 593d337(1)6r3e(2) 19.8 8 0.100 1.28 470 e 593d477(1)6r3e(2) 28.2 10 0.100 1.28 10 v dc at + 85 c; 7 v dc at 125 c 4.7 a 593d475(1)010a(2) 0.5 6 3.000 0.16 6.8 a 593d685(1)010a(2) 0.7 6 3.000 0.16 10 a 593d106(1)010a(2) 1.0 6 2.000 0.19 15 a 593d156(1)010a(2) 1.5 6 2.000 0.19 15 b 593d156(1)010b(2) 1.5 6 0.700 0.35 22 a 593d226(1)010a(2) 2.2 8 1.500 0.22 22 b 593d226(1)010b(2) 2.2 6 0.700 0.35 22 c 593d226(1)010c(2) 2.2 6 0.345 0.56 33 b 593d336(1)010b(2) 3.3 6 0.600 0.38 33 c 593d336(1)010c(2) 3.3 6 0.300 0.61 47 b 593d476(1)010b(2) 4.7 6 0.600 0.38 47 c 593d476(1)010c(2) 4.7 6 0.300 0.61 47 d 593d476(1)010d(2) 4.7 6 0.200 0.87 68 c 593d686(1)010c(2) 6.8 6 0.275 0.63 68 d 593d686(1)010d(2) 6.8 6 0.150 1.00 100 c 593d107(1)010c(2) 10.0 8 0.200 0.74 100 d 593d107(1)010d(2) 10.0 6 0.100 1.22 150 d 593d157(1)010d(2) 15.0 8 0.100 1.22 150 e 593d157(1)010e(2) 15.0 8 0.100 1.28 220 d 593d227(1)010d(2) 22.0 8 0.125 1.10 220 e 593d227(1)010e(2) 22.0 8 0.100 1.28 330 e 593d337(1)010e(2) 33.0 10 0.100 1.28 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) tolerance: x0, x9, x5 (2) terminations and packaging: 2te3, 2we3, 8t, 8w
593d www.vishay.com vishay sprague revision: 09-apr-13 5 document number: 40005 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 16 v dc at + 85 c; 10 v dc at + 125 c 1.0 a 593d105(1)016a(2) 0.5 4 5.500 0.12 3.3 a 593d335(1)016a(2) 0.5 6 3.500 0.15 4.7 a 593d475(1)016a(2) 0.8 6 2.500 0.17 4.7 b 593d475(1)016b(2) 0.8 6 1.500 0.24 6.8 a 593d685(1)016a(2) 1.1 6 3.000 0.16 10 a 593d106(1)016a(2) 1.6 6 1.700 0.21 10 b 593d106(1)016b(2) 1.6 6 0.800 0.33 10 c 593d106(1)016c(2) 1.6 6 0.450 0.49 15 b 593d156(1)016b(2) 2.4 6 0.800 0.33 15 c 593d156(1)016c(2) 2.4 6 0.400 0.52 22 b 593d226(1)016b(2) 3.5 6 0.700 0.35 22 c 593d226(1)016c(2) 3.5 6 0.350 0.56 33 b 593d336(1)016b(2) 5.3 6 0.700 0.35 33 c 593d336(1)016c(2) 5.3 6 0.300 0.61 33 d 593d336(1)016d(2) 4.2 4 0.225 0.82 47 c 593d476(1)016c(2) 7.5 6 0.300 0.61 47 d 593d476(1)016d(2) 7.5 6 0.150 1.00 68 d 593d686(1)016d(2) 10.9 6 0.150 1.00 100 d 593d107(1)016d(2) 16.0 8 0.125 1.10 100 e 593d107(1)016e(2) 16.0 8 0.100 1.28 150 e 593d157(1)016e(2) 24.0 8 0.100 1.28 20 v dc at + 85 c; 13 v dc at + 125 c 1.0 a 593d105(1)020a(2) 0.5 4 5.500 0.12 2.2 a 593d225(1)020a(2) 0.5 6 4.000 0.14 3.3 a 593d335(1)020a(2) 0.7 6 4.000 0.14 4.7 a 593d475(1)020a(2) 0.9 6 3.500 0.15 4.7 b 593d475(1)020b(2) 0.9 6 1.000 0.29 6.8 b 593d685(1)020b(2) 1.4 6 1.000 0.29 10 b 593d106(1)020b(2) 2.0 6 1.000 0.29 10 c 593d106(1)020c(2) 2.0 6 0.450 0.49 15 b 593d156(1)020b(2) 3.0 6 1.000 0.29 15 c 593d156(1)020c(2) 3.0 6 0.400 0.52 22 c 593d226(1)020c(2) 4.4 6 0.375 0.54 22 d 593d226(1)020d(2) 3.5 4 0.225 0.82 33 c 593d336(1)020c(2) 6.6 6 0.350 0.56 33 d 593d336(1)020d(2) 6.6 6 0.200 0.87 47 d 593d476(1)020d(2) 9.4 6 0.200 0.87 47 e 593d476(1)020e(2) 7.5 4 0.150 1.05 68 d 593d686(1)020d(2) 13.6 6 0.175 0.93 68 e 593d686(1)020e(2) 13.6 6 0.150 1.05 100 e 593d107(1)020e(2) 20.0 8 0.150 1.05 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) tolerance: x0, x9, x5 (2) terminations and packaging: 2te3, 2we3, 8t, 8w
593d www.vishay.com vishay sprague revision: 09-apr-13 6 document number: 40005 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 25 v dc at + 85 c; 17 v dc at + 125 c 1.0 a 593d105(1)025a(2) 0.5 4 4.000 0.14 1.5 a 593d155(1)025a(2) 0.5 6 4.000 0.14 2.2 a 593d225(1)025a(2) 0.6 6 4.000 0.14 2.2 b 593d225(1)025b(2) 0.6 6 1.500 0.24 3.3 b 593d335(1)025b(2) 0.8 6 1.500 0.24 4.7 b 593d475(1)025b(2) 1.2 6 1.500 0.24 4.7 c 593d475(1)025c(2) 1.2 6 0.525 0.46 6.8 c 593d685(1)025c(2) 1.7 6 0.500 0.47 10 c 593d106(1)025c(2) 2.5 6 0.450 0.49 15 c 593d156(1)025c(2) 3.8 6 0.425 0.51 15 d 593d156(1)025d(2) 3.8 6 0.250 0.77 22 d 593d226(1)025d(2) 5.5 6 0.200 0.87 33 d 593d336(1)025d(2) 8.3 6 0.200 0.87 33 e 593d336(1)025e(2) 8.3 6 0.200 0.91 47 e 593d476(1)025e(2) 11.8 6 0.200 0.91 35 v dc at + 85 c; 23 v dc at + 125 c 0.47 a 593d474(1)035a(2) 0.5 4 4.000 0.14 0.68 a 593d684(1)035a(2) 0.5 4 4.000 0.14 1.0 a 593d105(1)035a(2) 0.5 4 4.000 0.14 1.0 b 593d105(1)035b(2) 0.5 4 2.000 0.21 1.5 b 593d155(1)035b(2) 0.5 6 2.000 0.21 1.5 c 593d155(1)035c(2) 0.5 6 0.900 0.35 2.2 b 593d225(1)035b(2) 0.8 6 2.000 0.21 2.2 c 593d225(1)035c(2) 0.8 6 0.900 0.40 3.3 c 593d335(1)035c(2) 1.2 6 0.700 0.45 4.7 c 593d475(1)035c(2) 1.6 6 0.500 0.47 6.8 c 593d685(1)035c(2) 2.4 6 0.475 0.48 6.8 d 593d685(1)035d(2) 2.4 6 0.300 0.71 10 c 593d106(1)035c(2) 3.5 6 0.450 0.49 10 d 593d106(1)035d(2) 3.5 6 0.300 0.71 15 d 593d156(1)035d(2) 5.3 6 0.300 0.71 15 e 593d156(1)035e(2) 5.3 6 0.300 0.74 22 d 593d226(1)035d(2) 7.7 6 0.300 0.71 22 e 593d226(1)035e(2) 7.7 6 0.275 0.77 50 v dc at + 85 c; 33 v dc at + 125 c 1.0 b 593d105(1)050b(2) 0.5 4 2.000 0.21 1.0 c 593d105(1)050c(2) 0.5 4 1.600 0.26 1.5 b 593d155(1)050b(2) 0.8 6 2.000 0.21 1.5 c 593d155(1)050c(2) 0.8 6 1.500 0.27 2.2 c 593d225(1)050c(2) 1.1 6 1.500 0.27 2.2 d 593d225(1)050d(2) 1.1 6 0.800 0.43 3.3 c 593d335(1)050c(2) 1.7 6 1.500 0.27 3.3 d 593d335(1)050d(2) 1.7 6 0.800 0.43 4.7 d 593d475(1)050d(2) 2.4 6 0.600 0.50 4.7 e 593d475(1)050e(2) 1.9 6 0.600 0.50 6.8 d 593d685(1)050d(2) 3.4 6 0.600 0.50 6.8 e 593d685(1)050e(2) 3.4 6 0.550 0.55 10 d 593d106(1)050d(2) 5.0 6 0.550 0.52 10 e 593d106(1)050e(2) 5.0 6 0.550 0.55 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) tolerance: x0, x9, x5 (2) terminations and packaging: 2te3, 2we3, 8t, 8w
593d www.vishay.com vishay sprague revision: 09-apr-13 7 document number: 40005 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 recommended voltage de rating guidelines (for temperatures below + 85 c) standard conditions. for example: output filters capacitor voltage rating operating voltage 4.0 2.5 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 severe conditions. for example: input filters capacitor voltage rating operating voltage 4.0 2.5 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 power dissipation case code maximum permissible power diss ipation at + 25 c (w) in free air a 0.075 b 0.085 c 0.110 d 0.150 e 0.165 standard packaging quantity case code units per reel 7" reel 13" reel a 2000 9000 b 2000 8000 c 500 3000 d 500 2500 e 400 1500 product information guide for molded ta ntalum capacitors www.vishay.com/doc?40074 pad dimensions packaging dimensions moisture sensitivity www.vishay.com/doc?40135 selector guides solid tantalum selector guide www.vishay.com/doc?49053 solid tantalum chip capacitors www.vishay.com/doc?40091 faq frequently asked questions www.vishay.com/doc?40110
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
